Poly Flex at IBEX 2007 - Miami International Boat Show

Poly Flex General Manager, Jason Cooper and Canadian/US Distributor, Hugh Carroll of 

Thermoboat were at the IBEX Show in Miami, Florida in October 2007.

Another successful show with Poly Flex pushing further into the US market.

Check back for details on the 2008 Show.

   Email:  info@thermoboat.com

Poly Flex at Mandurah Boat Show 2007

Managing Director, Brian Gagen traveled to Mandurah in October 2007

to support our W.A. Distributor, Waterfront Marine at the Mandurah Boat Show.

Check back for details on the 2008 Show.

METS 2008 in Amsterdam 2007

Poly Flex General Manager, Jason Cooper and UK Distributors, WIll & Rachel Meddick of 

Southern Cross Marine, were at METS Show in Amsterdam, The Netherlands in November 2007.

Enquiries were received from around the world and the appointment of Ufin S.r.l., our new Italian distributor

Check back for details on the 2008 Show.

                                   

 

scmsales@btconnect.com                        info@ufin.com

 

POLY FLEX CUSTOM MOUNTS FOR HATTERAS

PRESS RELEASE

TRIBUTE PERFORMANCE BOATS PICKS POLY FLEX

  PRESS RELEASE

Marine Industry Showcase - Canberra, March 2007

Poly Flex, along with Australian International Marine Export Group (AIMEX), were please to 

attend the Marine Industry Showcase & Forum at Parliament House in Canberra in March 2007.  

This was a unique opportunity for the entire industry to demonstrate to Government the importance of the industry.

PICTURED (from left): Brian Gagen, Managing Director, Poly Flex with Hon. Bob Baldwin, 

(Parliamentary Secretary to the Minister of Industry, Tourism & Resources) & 

Richard Chapman, President of the Australian International Marine Export Group (AIMEX)

INTRODUCING OUR NEW Ci SERIES ENGINE MOUNTS

   Product Release

Poly Flex engine mounts used in the Victory Team Interceptor series

 
The UAE based 'Victory Team' design & build the spectacular 55 knot 'Interceptor' series pursuit boats
using Poly Flex P#8.8F engine mounts under the 2x Yanmar 6CX-GTE 460hp engines.

Poly Flex  'CTF' engine mounts used in the magnificent S.Y. CAMBRIA

Using Poly Flex P##10.5CTF double engine mounts
 under the Cummins NT855M main engine.

 Engine mounts supplied by our UK Distributor:
 Mr Will Meddick - Southern Cross Marine Ltd.
   
 Contact Email:  scmsales@btconnect.com

photo courtesy of:
 S.Y. Cambria
 Vieux Port de Cannes, Gare Maritime,
 Cannes 06400, France

Poly Flex  'Y#2.5CTF' engine mounts used in retrofits

Poly Flex has developed the new Y#2.5CTF mount series
to suit the Yanmar 4, 3 and 2 cylinder diesel engine range.
For example the Y#2.5CTF60-25-16(50)-Orange[pictured]
engine mount can be retrofitted to:-
Yanmar- 3GM30, 3YM30, 3YM20,2GM20 & 2YM15 engines.


                                                           photo shows the Y#2.5CTF retrofitted to a Yanmar 2GM20
                                                           Supplied by our Canadian Distributor:
                                                           ThermoBoat Ltd.  http://www.thermoboat.com/
                                                           Mr. Hugh Carroll - Victoria, BC, Canada.
                                                           Contact Email:  hcarroll@shaw.ca

Poly Flex  'CTF' engine mounts used in new high performance RIB.

'Tigershark' Rigid Inflatable Boat (RIB)
by EPS Marine - Hamble, Southampton, UK,
with a 410hp 6.5litre V8 diesel
(supercharged & aftercooled)
driving a surface-piercing propeller system.
Using Poly Flex P#8.5CTF engine mounts,
supplied by our UK Distributor: Southern Cross Marine Ltd.
    see contact details on 'Home Page'
photo courtesy of EPS Marine: http://www.epsmarine.com/ 

 

WM Diesel has been a long term user and Agent for
Poly Flex Engine Mounts & Couplings.

Poly Flex is also an Agent for WM Kubota based diesel
engines; for Queensland, Northern Territory, Papua
New Guinea and Northern NSW (north of Coffs Harbour).

(22hp diesel engine shown)

for engine specification details, go to:   http://www.wm-marine-diesel.com/
 

Poly Flex  has developed a new testing facility and has gained
DNV (DET NORSKE VERITAS) Type Approval for the engine mount
and coupling range.

                 
The new test facility being setup for DNV Type Approval.
This testing and inspection program has been carried out and the final report has been approved
by DNV Oslo.

Poly Flex  'CTF' engine mounts used in new Luxury Cruiser.

     
        The new Riviera 47' luxury cruiser: Built by Riviera Marine.
Powered by 2x Cummins 6QSM11 (650hp) diesels using the new Poly Flex 'CTF' engine mount system

Poly Flex flexible disc couplings used in Offshore Racers.

                      
        The Riviera Class2 Offshore Powerboat: Built by Riviera Marine.
capable of at least 130mph, with a single supercharged+turbocharged 9.3litre V8 diesel engine,
using Poly Flex power transmission disc coupling.
  

        
              Stefan's Class 1 Offshore racer 'JAGER' in full flight.
                Built by Riviera Marine and raced by Stefan.
                Powered by: 2x Detroit 1200hp V8 diesels.
                Top speed: approx 150mph(240kph).

Poly Flex engine mounts and disc couplings specified for Royal Thai Navy
patrol boats

          Using Poly Flex Engine Mounts & Disc Couplings
ROYAL THAI NAVY - KEKA ^(R) CLASS PATROL BOAT
Australian Submarine Corporation/Silkline Corporation : Coastal Patrol Boat
(photograph courtesy of Australian Submarine Corporation - Surface Vessel Division.)

Poly Flex engine mounts used in Historical Tall Ship.

  
The 'James Craig' undergoing trials on Sydney Harbour and sea trials under-sail off Sydney
after its extensive restoration.
The restoration was carried out by the Sydney Maritime Museum Limited, trading as
Sydney Heritage Fleet. [photo source: www.seaheritage.asn.au/jamescraig/index.cfm]

Poly Flex 'CTF' series engine mounts used in the Azzura 50' luxury cruiser.

Poly Flex 'CTF' series engine mounts used in luxury cruiser.

Contact: Palm Beach Motor Yachts, Ph:(02)9997-8855

Poly Flex wins military contracts in Asia.
1. After exhaustive comparison testing between many of the mounts on the world market,
the main contractor(Mercedes-Benz) has selected Poly Flex mounts to support and isolate
the very sensitive computer equipment and instrumentation used in these vehicles.

    just some of the 330 mounts for this contract.