Engine Mounts

home engine mounts disc couplings instrument mounts machinery mounts new products news

INTRODUCING OUR NEW Ci SERIES ENGINE MOUNTS

Poly Flex engine mounts are specifically designed to provide vibration isolation for your machinery while also providing high resistance to movement caused by dynamic loads, such as propeller thrust and lateral loads experienced in marine applications.

Poly Flex model: P#7.5F73-11-16(50) shown Marine: Down-Angle application shown

           P#7.5F mount
Manufactured from high strength engineering polymers that are resistant to most fuels, oils and chemicals.

Poly Flex uses a colour coding system to visually identify the hardness of each engine mount,
that is:
          Orange = 50 Shore Durometer Hardness(SDH) - 'A scale'
               Blue = 60 SDH-A
           Yellow = 70 SDH-A
            Green = 80 SDH-A
               Red = 90 SDH-A

Poly Flex Engine Mounts -design features
This is a .pdf file: Adobe Reader is required. Click 'Back' to return to this screen.

For further information and specifications on Poly Flex engine mounts please complete the following form, we will establish which mounts are suitable for your application from the information supplied and fax/email details to you.

It may be necessary that we contact you for more detailed information to make the most suitable engine mount selection.

Note: As a matter of company policy, the information you supply will be used by Poly Flex only, and WILL NOT be distributed by Poly Flex to any other party.

Name:

Company: ,if applicable

Email address:

Address:

Phone:

Fax:

How were you made aware of Poly Flex products ?

Type of application: other, please specify:

if 'Marine propulsion': type of engine/gearbox arrangement:

Is this vessel under Survey Classification? Yes No - If Yes, please specify:

if you are replacing an existing set of engine mounts please show the current
dimensions of the installation,
or, if you are preparing for an original installation, please show the maximum
dimensions that can be accommodated by the mounts.

note: for round holes just type d= 'hole dia'
Engine Mount dimensions If any dimension is not available please type estimated dimension. a= b= c= d= e= f= j= k=

Engine/machinery details (including Make & Model):

Engine/machinery weight (kg)

Gearbox/transmission details (including Make & Model):

Gearbox reduction::1

Gearbox/transmission weight (kg)

click 'Submit' to email the above to Poly Flex for processing:
                                                                                              please wait for confirmation page,
                                                                                                                if web is busy it may take a few minutes

home engine mounts disc couplings instrument mounts machinery mounts new products news